How To Build A Shade Sail Alone | Camping | DIY

Campers sometimes need a shade sail for resting, but when they do not have a tent, how to make a simple shades outdoors to resist the sun light bunnings? This article shows two steps to make it. 

The first step is to prepare the shade sail. We need to prepare a square waterproof sail, 4 nails and 4 camp ropes. The length of the camp rope is 1.5 times that of the camping pillar. And one is 4.2 FT. First pull the camp pillar apart. because our waterproof canvas is thick shade sail, so we suggest to use the second hole of camp pillar. In this way, the pillar will be stronger. Then we treat the other 3 pillar in the same way.

The second step is to build. First spread the shade sail in the area you choose in advance. Place the camp pillar at 45 degrees of the four angles around the waterproof shade cloth. Pin the camp post and tie the camp rope. It is suggested to use 30 cm of nails. Then put the camp rope on, set up the sky curtain. We should pay attention that we must first hit nails and then pull the rope,  finally support the camp pillar, lightning cap can be replaced by strong shade sail clip. The sun shade sail on all sides to do this rope to loose the camp pillar in tension is good. If the ground you choose is soft, you can fix one column with two camp ropes, which can achieve better results. After the camp rope is tied up, then stand up the camp rope. First try to stand one, if down, it doesn't matter. Pay attention to tightening the camp rope at the same time as the column. After the pull is average, the Canvas will not fall. Adjust the tightness of the camp rope by the way. After the camp rope camp column adjusts the balance, the Camping Canvas is finished setting up.

When the Canvas is set up, we need to tighten the rope. If the pull of the camp rope is greater than the reaction of the sunshade sail. You can see that the camp pillar is very tight. The pillar will become curved, and at this time we have to deal with the release of tension. We need to put down the physical ground of it again, and the pillar is straight. We can feel that the camp pillar is not tight when shaking the camp pillar.

Finally, the sun shade structure is built. We should notice that if the camp pillar is in a tight state, it will bend, when the sun sail force, the camp column will be easy to break, so when we build the sun sail outdoors, be sure to lift the camp pillar and then put it back to the ground to release the pressure.

HeFei Better technology co., LTD, China Top plastic shade net supplier, supply superior sale service and Durable shade sails. If you need the product,please email us your project and details, we offer free custom made.