How to Install Economy Windscreen For Fence

Visualizações: 347 Autor: Editor de Site Hora de Publicação: Publicar TimeOrigin: Local

A windscreen is basically a fence one blocks the wind widely used in outdoor living spaces such as a patio or deck. Wind Screens are also used around a pool area to trap and build heat for bathers. Someone wonder how to install windscreen on their fence or wall. There are detailed 12-step operation to help you quickly complete the installation windscreen.

windscreen-supplier.jpg

Step 1 - Unroll the windscreen and lay it out in front of fence; make sure the top and bottom grommeted seams/ hems are against the fence.

Step 2Measure the same number of “diamond” chain links from top and bottom of fence to determine center; Install cable tie in top left corner of windscreen- Leave approximately 8’’- 12’’ extended past the tension bar to be cut off; Secure excess material to the opposite fence or pole to make cutting easier.

Step 3Secure top of the screen every 10’- 15’ ; Place cable tie at the same location of fence as those in the top left corner(same number of diamonds from the top)

Step 4Secure opposite corner of screen; extend opposite top material 8’’- 12’’ past pole, making cutting easier.

Step 5Fill in empty grommets along the top of the windscreen.

Step 6Secure bottom left corner of screen and leave an 8’’- 12’’ secured extension.

Step 7Secure bottom of windscreen every 10’-15’; Pull down rather than across

Step 8Secure bottom right corner of windscreen and leave an 8’’- 12’’ secured extension.

Step 9Full in empty grommets along the bottom of the windscreen.

Step 10 On the sides, cut the screens as straight as possible, leaving approximately 2’’- 4‘’ extended past the tension bar; It is better to have too much excess wind screen than too little.

Step 11Start at the top and fold the sides of the screen inward, just short of the tension bar; Work a cable tie through the folded edge, leaving approximately 0.75’’ of the folded material between the cable tie and edge; Secure cable tie and fold to the tension bar.

Step 12 Repeat this process every 7’’- 12’’ along both sides of the screen.

Follow these steps above, you can finish the installation of windscreen. Now enjoy your new windscreen and bath. HEFEI BETTER TECH is professional fence windscreen covers supplier who have own factory and competitive price. Welcome to inquire the latest price. More details about Windscreen welcome to visit our website. 

×

Entre em contato conosco